SARS-CoV-2 & Influenza A/B Rapid Test Kits Manufacturer supplier price

SARS-CoV-2 & Influenza A/B Rapid Test Kits Manufacturer supplier price,
SARS-CoV-2 Influenza A/B test,

Product details

Intended Use
SARS-CoV-2 & Influenza A/B Antigen Combo Rapid Test Kit (Lateral chromatography) is to be used in conjunction with clinical manifestations and other laboratory test results to assist in the diagnosis of patients with suspected SARS-CoV-2 or Influenza A/B infection. The test is only to be used by medical professionals. It provides only an initial screening test result and more specific alternative diagnosis methods should be performed in order to obtain the confirmation of SARS-CoV-2 or Influenza A/B infection. For professional use only.

Test Principle
SARS-CoV-2 & Influenza A/B Antigen Combo Rapid Test Kit (Lateral chromatography) is a lateral flow chromatographic immunoassay. It has two results Windows. On the left for SARS-CoV-2 antigens. It has two pre-coated lines, “T” Test line and “C” Control line on the nitrocellulose membrane. On the right is the result window of FluA/FluB, it has three pre-coated lines, “T1” FluA Test line, “T2” FluB Test line and “C” Control line on the nitrocellulose membrane.

Main Contents

Components provided are listed in the table.

Operation Flow

•  Step 1: Sampling

Tilt patient’s head back 70 degrees. Carefully insert the swab into nostril until the swab reaches the back of the nose. Leave swab in each nostril for 5 seconds to absorb secretions.

•  Step 2: Testing

1. Remove an extraction tube from the kit and a test box from the film bag by tearing the notch. Put them on the horizontal plane.

2. After sampling, soak the smear below the liquid level of the sample extraction buffer, rotate and press 5 times. Immerse time of smear at least 15s.

3. Remove the swab and press the edge of the tube to squeeze out the liquid in the swab. Throw the swab into the biological hazardous waste.

4. Fix the pipette cover firmly on the top of the suction tube. Then gently turn the extraction tube5 times.

5. Transfer 2 to 3 drops (about 100 ul) of the sample to the sample surface of the test band and start the timer. Note: if frozen samples are used, the samples must have room temperature.

• Step 3: Reading

15 mins later, read the results visually. (Note: do NOT read the results after 20 mins!)

Result Interpretation

1.SARS-CoV-2 Positive Result

Colored bands appear at both test line (T) and control line (C). It indicates a

positive result for the SARS-CoV-2 antigens in the specimen.

2.FluA Positive Result

Colored bands appear at both test line (T1) and control line (C). It indicatesa

positive result for the FluA antigens in the specimen.

3.FluB Positive Result

Colored bands appear at both test line (T2) and control line (C). It indicatesa

positive result for the FluB antigens in the specimen.

4.Negative Result

Colored band appear at control line (C) only. It indicates that the

concentration of the SARS-CoV-2 and FluA/FluB antigens do not exist or

below the detection limit of the test.

5.Invalid Result

No visible colored band appears at control line after performing the test. The

directions may not have been followed correctly or the test may have

deteriorated. It is recommended that the specimen be re-tested.

Order Information

The SARS‑CoV‑2 & Flu A/B Rapid Antigen Test is a rapid chromatographic immunoassay for the simultaneous detection and differentiation of the nucleocapsid protein antigens of SARS‑CoV‑2, influenza virus A and influenza virus B present in the human nasopharynx.
SARS-CoV-2 and Flu A+B Combo Test Kits. With many respiratory illnesses presenting with similar symptoms
Specimen collection. Implement recommended infection prevention and control measures and collect respiratory specimens for influenza and SARS-CoV-2 testing